taper, drywall

Additional Information

• Education: Secondary (high) school graduation certificate
• Experience: 1 year to less than 2 years

Work site environment

• At heights
• Dangerous
• Noisy

Work setting

• Commercial
• Residential

Tasks

• Apply successive coats of compound and sand seams and joints
• Apply, level and smooth coats of plaster
• Clean and prepare surfaces
• Cure freshly plastered surfaces
• Cut and install metal corner beads to protect exterior corners
• Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
• Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
• Finish corners and angles and create decorative designs in finish coat, if required
• Measure, cut, fit and install drywall sheets
• Mix plaster ingredients to desired consistency
• Mould and install ornamental plaster panels, cornices and trim
• Position and secure sheets to metal or wooden studs or joists
• Smooth out excess compound and allow coat to dry
• Spray acoustic or texture materials over walls and ceilings
• Tape over joints using taping machine and embed tape in compound
• Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces
• Install corner beads and wire mesh around beams to which plaster is to be applied
• Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools
• Utilize laser alignment system

Work conditions and physical capabilities

• Bending, crouching, kneeling
• Hand-eye co-ordination
• Manual dexterity
• Physically demanding
• Repetitive tasks
• Work under pressure

Own tools/equipment

• Hard hat
• Steel-toed safety boots
• Tools
• Work Term: Permanent
• Work Language: English
• Hours: 40 hours per week